Author Archives: user48445
Certificate in Oil and Gas Well Technology (Level 3)
Oil and Gas Well Technology (City and Guilds – Level 3 Certificate)
This series will help learners achieve a broad understanding of the operational techniques of oilwell drilling, drilling calculations, completion and wireline well-servicing. It includes the function and construction of a representative selection of tools and equipment used in the drilling of oil and gas wells; the completion and wireline well-servicing of oil and gas wells; while providing guidance and practice on the calculations required during drilling operations.
The course/series consists of 3 modules:
• Oilwell Drilling Technology
• Drilling Calculations
• Oilwell Production Technology – (Well Completions)
These stand-alone modules will enable an individual to select those learning materials that suit his or her own particular requirements. Modules can be studied at the candidates own pace and can be studied in any order but the order is as numbered. The study time needed will vary from one module to another, and from one individual to another. It is likely to be in the range 40 – 60 hours for each module.
Each module will consist of four Workbooks, and a “Guide to Open Learning”.
No commitment to enrolling for the complete Oil and Gas Well Technology Series is required at any time although each candidate must register for each module. Modules are non-transferrable and can only be assigned to one candidate.
Each module (detailed above) may be assessed by examination and an individual certificate endorsed by City and Guilds of London Institute awarded to successful candidates.
Each exam which is passed successfully will contribute to one Certificate of Unit Credit towards The Certificate in Oil and Gas Well Technology. The Certificate will be awarded after all 3 Certificates of Unit Credit have been accumulated.
HNC Engineering Systems
style=”display:inline-block;width:728px;height:90px”
data-ad-client=”ca-pub-3755569401195888″
data-ad-slot=”2832308926″>
The HNC, Higher National Certificate in Engineering Systems by flexible open / distance learning provides you with a programme of study over a range of disciplines to help you develop skills to progress your career through employment in many engineering industries. This programme is a multidiscipline (M & E – Mechanical and Electrical) programme.
Mandatory (6 credits required):
- Communication: Practical Skills {Course Code D77G 34 – 1 credit}
- Mathematics for Engineering 1: (Mechanical and Manufacture) {Course Code DT5X 33 – 1 credit}
- Principles of Engineering Systems {Course Code DV9R 34 – 2 credits}
- Engineering Communication {Course Code DV9N 34 – 1 credit}
- Engineering Measurement and System Monitoring {Course Code DV9P 34 – 1 credit}
Optional Units (5.0 credits required):
- Electrical Networks and Resonance {Course Code – DG3G 34 – 1 credit}
- Mathematics for Engineering 2 {Course code DG4L 34 – 1 credit}
- Quality Management: An Introduction {Course Code DT8Y 34 – 1 credit}
- Engineering Principles {Course Code DR3L 34 – 1 credit}
- Materials Selection {Course Code DT46 34 – 1 credit}
- Statics and Strength of Materials {Course Code DR1T 34 – 1 credit}
- Dynamics {Course Code DT9T 34 – 1 credit}
- Three Phase Systems {Course Code DN47 34 – 1 credit}
- Electricity Power Systems (Course Code DN3W 34 – 1 credit}
- Electrical Machine Principles Course Code DN4J 34 – 2 credits}
- Electrical Safety {Course Code DN4L 34 – 1 credit}
- Single Phase A.C. Circuits {Course Code DG54 34 – 1 credit}
- Application of Electrical & Electronic Instruments {Course Code DN48 33 – 1 credit}
* Other subjects to follow
Graded Unit (1.0 credit)
- Engineering Systems Graded Unit 1 Examination {Course code DW11 34 – 1 credit}
More specific details of module content of the HNC Engineering Systems by distance learning.
Enrolment is usually at any time throughout the year. Minimum entrance qualifications is a ONC, OND, C&G qualifications, apprenticeship in a related field.
Application
Submit your details below to apply for this course, and we will get back to you with further details.
HNC Building Services Engineering
The HNC, Higher National Certificate in Building Services Engineering by flexible open / distance learning provides you with a programme of study over a range of disciplines to help you develop skills to progress your career through employment in traditional building services industries.
Mandatory Units (6 credits required):
- Design Principles and Application{Course Code DP12 34 – 1 credit}
- Analytical Methods {Course code DPOX 34 – 1 credit}
- Health and Safety in the Building Services Industry {Course code DP17 34 – 1 credit}
- Building Services Engineering Science {DP11 34 – 1 credit}
- Building Services Engineering Graded Unit {DP0M 34 – 1 credit}
- Building Services Engineering Project Management {DP10 34 – 1 credit}
Optional Units (6 credits required):
- Engineering Mathematics {Course code DP13 35 – 1 credit}
- Heating A {Course code DP15 34 – 1 credit}
- Heating B{Course code DP16 34 – 1 credit:
- Piped Distribution Systems {Course code DPON 34 – 1 credit:
- Thermofluids and Acoustic Criteria {Course code DPOT 34 – 1 credit}
- Air Conditioning A {Course code DPOV 34 – 1 credit}
- Air Conditioning B {Course code DPOW 34 – 1 credit}
- Building Management Systems {Course code DPOY 34 – 1 credit}
- Electricity and Lighting {Course code DPOR 34 – 1 credit}
* Other subjects to follow
More specific details of module content of the HNC Building Services Engineering by distance learning.
Enrolment is usually at any time throughout the year. Minimum entrance qualifications is a ONC, OND, C&G qualifications, apprenticeship in a related field.
Application
Submit your details below to apply for this course, and we will get back to you with further details.
HNC Mechanical Engineering (SQA) G840 15
The Higher National Certificate (HNC) in Mechanical Engineering by flexible open / distance learning provides you with a programme of study over a range of disciplines to help you develop skills to progress your career through employment in traditional mechanical industries.
Mandatory (9 credits required):
- Communication: Practical Skills {Course Code D77G 34 – 1 credit}
- Mathematics for Engineering 1: (Mechanical and Manufacturing) {Course Code DT5X 33 – 1 credit}
- Quality Management: An Introduction {Course Code DT8Y 34 – 1 credit}
- Engineering Principles {Course Code DR3L 34 – 1 credit}
- Materials Selection {Course Code DT46 34 – 1 credit}
- Statics and Strength of Materials {Course Code DR1T 34 – 1 credit}
- Dynamics {Course Code DT9T 34 – 1 credit}
- Pneumatics and Hydraulics {Course Code DT9X 34 – 1 credit}
- Thermofluids {Course Code DT9P 34 – 1 credit}
Optional Units (2.0 credits required):
- Fundamentals of Control Systems and Transducers {Course Code – DN3Y 34 – 1 credit}
- Mathematics for Engineering 2 {Course code DG4L 34 – 1 credit)
* Other subjects to follow
Graded Unit (1.0 credit)
- Mechanical Engineering Graded Unit 1 Examination {Course code DV11 34 – 1 credit}
More specific details of module content of the HNC Mechanical Engineering by distance learning.
Enrolment is usually at any time throughout the year. Minimum entrance qualifications is a ONC, OND, C&G qualifications, apprenticeship in a related field.
Application
Submit your details below to apply for this course, and we will get back to you with further details.
HNC Electrical Engineering (SQA) G7TA 15
The HNC, Higher National Certificate in Electrical Engineering by flexible open / distance learning provides you with a programme of study over a range of disciplines to help you develop skills to progress your career through employment in traditional electrical industries. Why not download a HNC Electrical Engineering information pack.
Mandatory (9 credits required):
- Communication: Practical Skills {Course Code D77G 34 – 1 credit}
- Mathematics for Engineering 1: (Electronics and Electrical) {Course Code DG4H 33 – 1 credit}
- Three Phase Systems {Course Code DN47 34 – 1 credit}
- Electricity Power Systems (Course Code DN3W 34 – 1 credit}
- Electrical Machine Principles Course Code DN4J 34 – 2 credits}
- Electrical Safety {Course Code DN4L 34 – 1 credit}
- Single Phase A.C. Circuits {Course Code DG54 34 – 1 credit)
- Application of Electrical & Electronic Instruments {Course Code DN48 33 – 1 credit}
Optional Units (2.0 credits required):
- Electrical Networks and Resonance {Course Code – DG3G 34 – 1 credit}
- Mathematics for Engineering 2 {Course code DG4L 34 – 1 credit)
- Quality Management: An Introduction {Course Code DT8Y 34 – 1 credit}
- Fundamentals of Control Systems and Transducers {Course Code – DN3Y 34 – 1 credit}
* Other subjects to follow
Graded Unit (1.0 credit)
- Electrical Engineering Graded Unit 1 Examination {Course code DN3V 34 – 1 credit}
More specific details of module content of the HNC Electrical Engineering by distance learning.
Enrolment is usually at any time throughout the year. Minimum entrance qualifications is a ONC, OND, C&G qualifications, apprenticeship in a related field.
Application
Submit your details below to apply for this course, and we will get back to you with further details.
Application
Submit your details below to apply for this course, and we will get back to you with further details.
